❐特点
◆ 中心波长 1550±10nm
Center wavelength 1550±10nm
◆ 出纤光功率10W
High output power of 10 W
◆ 光纤 105μm/0.22NA
105μm/0.22NA multimode optical fiber
❐应用
Applications
◆ 医疗应用
Medical applications
引脚功能分配 Pin-out Assignment | |||
引脚 Pin | 功能Function | 引脚 Pin | 功能Function |
1 | 激光器LD (-) | 7 | PD (N) |
2 | - | 8 | PD (P) |
3 | - | 9 | 热敏电阻 Thermistor |
4 |
- | 10 | 热敏电阻 Thermistor |
5 |
- | 11 | 指示光激光器 Aiming Beam (-) |
6 | 激光器 LD (+) | 12 | 指示光激光器Aiming Beam (+5V) |
❐典型性能 Typical Device Performance (25℃)
典型值 Typical | 单位 Unit | |
光学参数 Optical | ||
中心波长 Center Wavelength | 1550±10 | nm |
输出功率 CW Output Power | 10 | W |
光谱宽度 (90%能量)Spectral Width (90%Energy) | <10.0 | nm |
波长 –温度系数 Wavelength Shift with Temperature | 0.3 | nm/℃ |
电学参数 Electrical | ||
阈值电流 Threshold Current | 0.7 | A |
工作电流 Operating Current | 8.5 | A |
工作电压 Operating Voltage | 5.9 | V |
斜率效率 Slope Efficiency | 1.3 | W / A |
能量转化效率 Power Conversion Efficiency | 20.0 | % |
指示光 Aiming Beam | ||
输出功率 CW Output Power | 2-3 | mW |
中心波长 Center Wavelength | 650±10 | nm |
工作电流 Operating Current | 30 | mA |
工作电压 Operating Voltage | 5 | V |
光纤参数 *Fiber* | ||
纤芯芯径 Fiber Core Diameter | 105 | μm |
包层直径 Fiber Cladding Diameter | 125 | μm |
数值孔径 Numerical Aperture | 0.22 | - |
光纤长度 Fiber Length | 1-5 | m |
光纤连接头 Fiber Connector | - | - |
*光纤可定制。
*Customized fiber and connector available.
❐其他参数 Others
最小值 Min | 最大值 Max | 单位Unit | |
工作温度 Operating Temperature | 15 | 35 | ℃ |
相对工作湿度 Operating Relative Humidity | - | 75 | % |
存储温度 Storage Temperature | -20 | 80 | ℃ |
相对存储湿度 Storage Relative Humidity | - | 90 | % |
引脚焊接温度(最长 10 s) Lead Soldering Temperature (10 s max) |
- | 250 | ℃ |
本产品说明书数据仅供参考。具体指标以合同技术协议为准,产品如有升级,以升级后指标为准。
本公司对产品说明书 具有最终解释权。
This instruction is for reference only. Han's TCS improves its products continually and
therefore may change specifications without notice to customers for details.
@2024 Han's TianCheng Semiconductor Co., Ltd. All rights reserved.